Ghost Immobiliser Fitting
Protect your vehicle against key theft, cloning, and hacking with the first aftermarket CAN-Immobiliser. With the additional option to connect to an Ghost app and GPS tracking system, which can send you alerts to call in the event that your vehicle is damaged with or stolen.
The installation of an Ghost immobiliser can be done by a certified technician. It is important to have the proper tools and heat shrink tubing.
Getting Started
Ghost immobilisers can be a great alternative to physical theft devices such as car alarms and wheel locks. They guard your vehicle without using LED indicators or key fobs. They connect directly to the ECU CAN data network, and can only be activated after entering a PIN code. This provides a more secure level of protection from key hacking, cloning, and even ECU swapping.
As a result, installing a ghost immobiliser Birmingham has to be done with a high degree of agility and precision. It's like walking through a minefield. One misstep could cause serious damage to your vehicle's electrical circuits. To avoid this, it's essential that you understand the installation process and prepare your vehicle accordingly.
The first step is to prepare the vehicle by removing interior panels to make room for the immobiliser device. Once you've found the ideal location to hide it put it in place with cable ties to keep it from being removed or damaged. Then, clean up the wiring by tying loose wires, and then using insulation tape or heat shrink tubing to cover exposed connections. This will reduce the chance of short circuits that are not intended to be there while also improving the appearance and reducing the likelihood of tampering by thieves.
Finally, identify a source of constant 12V power and a grounding point for the ghost immobiliser. Once you have found them, test the power cables with a multimeter. Finally, connect the CAN H and L wires from the immobiliser to your chosen power source and grounding point.
It is essential to check all connections and check the immobiliser to check for signs of corrosion. The process of entering a PIN and launching the car is a great way to test the system. This should be a regular part of your daily routine since it allows you to detect any intermittent problems early. Regular testing will help increase the longevity of your device and keep it running at its peak.
Preparing your vehicle
The installation of an Ghost immobiliser can be a difficult task that requires tools and expertise. A wiring diagram of the vehicle is crucial to identify the proper wires and making precise connections. A multimeter is a great tool to check the electrical properties and ensure security. Cable tie and insulation tape can be used to secure the connections and shield them from tampering. A user manual is available for your Ghost Immobiliser. It will give you specific instructions that are tailored to your model.
Once installed, a ghost immobiliser is able to stop unauthorised engine starts by requiring the owner to input a unique PIN code sequence through existing buttons in the steering wheel or center console. This can be done either manually or remotely through an app for mobile phones, and the code can easily be changed by the vehicle owner at anytime. The device is silent and is undetectable by thieves because it doesn't emit any radio frequency.
Ghost immobilisers connect directly to the vehicle's CAN bus, which is a network that connects to all of the vehicle's electronic control units (ECUs). It intercepts the signals transmitted by ECUs, and blocks the engine if a false signal is identified. The system is tamperproof and weatherproof, with no LED indicators or key fobs to attract the attention of thieves.
It can be placed behind or in a less visible area to ensure that it isn't obvious to thieves and does not interfere with vehicle performance. It could even be placed in a small container which makes it less likely to be spotted during a test drive by unscrupulous salespeople for cars.
Its stealthy operation and integration with the vehicle's CAN bus network make it an effective deterrent against modern methods of theft, such as key cloning and signal relay attacks. The system can be integrated with other security measures to create an effective barrier that can deter even the most obstinate thieves. This is why more insurance companies are now suggesting or even requiring ghost immobilisers to be fitted, as it will significantly lower the cost of insurance.
Making Connections
Ghost immobilisers are completely silent, unlike traditional security systems which can be heard by thieves. They prevent them from knowing that your car is on. They also stop high tech methods of stealing vehicles such as OBD hacking. Installing them without leaving permanent marks on your vehicle is an excellent option for those who intend to sell their vehicle in the near-future.
The Autowatch Ghost 2 CANbus immobiliser is one of the latest and most reliable options to stop car theft. It uses the CAN data network to deactivate your engine and generates a PIN code that only you know, so it's difficult for criminals to detect. It can be used in a variety of vehicles and is compatible with a variety of available features, including car alarms GPS trackers, car alarms and steering wheel locks and door bypass systems for locks.
If you choose to install a Ghost immobiliser, be sure to consult the wiring diagram for your particular car model to identify the wires to connect. Check their locations to ensure they are accurate, and label them or tape them to help remember them. It is also necessary to find a source of constant power (12V) and a grounding point for the system. Once you have these in place, you can start to make the connections needed to complete the installation.
If the ghost immobiliser is connected to your CAN bus it will block your vehicle from starting unless you enter a pin code using the buttons on the dashboard or steering wheel. This will stop ECU cloning and other methods of stealing vehicles. Additionally, it can be paired with other approved by Thatcham security equipment, such as alarms and tyre clamps to provide your vehicle with an even greater degree of security.
As the UK automotive aftermarket industry grows and expand, so do the options to secure your vehicle. There are so many ways for thieves to get into your car and steal it, therefore it's vital to take every precaution to ensure that it isn't taken away. That's why ghost immobilisers have become an extremely popular option for responsible car owners.
Testing the System
The Ghost Immobiliser communicates with the vehicle's ECU via an CAN network. This stops the engine from starting until the PIN code is entered. This makes it difficult for thieves copy your key fob to start your vehicle, and even more difficult to disable the system through hacking its electronic.
Ghost Immobilisers can also be utilized together with GPS tracking devices that will aid in tracking your vehicle and locate it if it's stolen. This feature is not an option that is commonly used in security products sold by the aftermarket however it's an excellent option to increase your security and provide assurance that your vehicle is protected.
The Ghost-II immobiliser offers not only enhanced security but also provides a more convenient experience for the user, by eliminating the need to use additional key fobs or devices. It has a simple and intuitive PIN code entry system that is seamlessly integrated into your everyday routine. In addition, it offers modes of deactivation and other features that let you temporarily disable the immobiliser valet parking or servicing.
Make sure you have the tools you need and familiarise yourself first with the wiring of your vehicle. A basic set of hand tools will provide you with the flexibility to create precise connections, while a multimeter can help check electrical values. Insulation tape and heat-shrink tubing is essential to shield connections from short circuits. Cable ties can also be used to secure wiring. Lastly, car immobiliser ghost to work in a well-lit location and wear appropriate safety gear when working with electrical tools and components.
You should test the Ghost immobiliser after you have completed the installation to make sure it is working properly. It is recommended to first start the car without entering the PIN. If this fails, you'll have to test the system again and perform a more thorough inspection of the connections.
The Ghost Immobiliser, unlike other security systems, is a secret device that cannot be recognized by thieves. It is also more effective than physical deterrents like wheel clamps and steering locks. It is TASSA acknowledged and approved by a few insurance companies, which makes it a cost-effective investment that will give you peace of mind you need.